Prodigy F1

Reducing rotating mass and increasing efficiency is key to improved performance on the race track. The Prodigy F1 Pro-Lite Rear Axle / Hub will accomplish both.  We started with a solid carbon fiber rear axle that is centerless ground to ensure it...

This is a lightweight clamping spool hub for the Prodigy F1. 

New for the Prodigy F1 is our heat treated steel chassis plate. This chassis plate lowers the center of gravity and adds 49 grams of weight where it's most optimal compared to the stock aluminum chassis plate.  

This is a package of 4 replacement o-rings used in the Prodigy Pro Kingpin Adjusters. 

This is a set of Prodigy Pro Kingpin adjusters and o-rings. 

This is a set of replacement Prodigy Pro Kingpins. Available in 4, 5 and 6 degree. 

This is a set of 5 degree kingpins for the Prodigy line of chassis. Machined from high strength steel and electroplated for smooth suspension action. 

eXcelerate RC's Pro-Lite carbon fiber axle is a centerless ground design for a precision fit. Available in 97mmm and 150mm lengths.  Applications: 97mm (1/12 and F1) 150mm (Pro 10)

This is a (2) pack of pivot screws for roll center adjustments. Available in .25 and .5mm heights to fine tune your roll center. These pivot screws should be used with the matching pivot socket XCE-0776. .5mm = Low Roll Center/High Pivot Axis .25mm =...

This is a package of (4) pivot sockets for roll center adjustments. Available in .25 and .5mm heights to fine tune your roll center.  .5mm = Low Roll Center/High Pivot Axis .25mm = High Roll Center/Low Pivot Axis

This is a package of (4) 4.3mm ball cups. Specs: Fits 4.3mm ball studs Fits 3mm threaded tie rods 21.5mm overall length

This is the spur nut for the Prodigy line of chassis. This spur nut includes one (1) o-ring. 

This is the rear axle tube for the Prodigy line of chassis. Fits: Prodigy 12 Prodigy F1 Prodigy WGT-R