Option Parts

Our V2 bump stops have been developed and track tested by Team Driver's over a variety of different track conditions.  The increased overall height of the bump stop in combination with several feel characteristics allow you do dial in the feel that...

Our new Low Friction Steering Bushings are made from a Teflon impregnated materiel that creates super smooth suspension action. This new material is especially effective in reducing friction under cornering load where lateral forces are applied to the...

Lock in your Prodigy's kingpin camber with our all-new Camber Wedge's. Printed from a high strength resin material, these caster wedges feature a pinned design that fit into the camber degree holes of the Prodigy front end plates. This locking design...

Lock in your Prodigy's kingpin camber with our all-new Camber Wedge's. Printed from a high strength resin material, these camber wedges feature a pinned design that fit into the camber degree holes of the Prodigy front end plates. This locking design...

This is a package of (4) pivot sockets for roll center adjustments. Available in .25, .5mm, .75 and 1mm heights to fine tune your roll center and pivot axis on your Prodigy cars!! 1.0mm = Ultra Low Roll Center/Ultra High Pivot Axis .75mm = Super Low Roll...

Our tray fan mount allows you to mount a 25mm or 30mm fan on the battery tray of your Prodigy chassis and blow air directly on your motor to keep temperatures down during a run.  Printed from a high strength PLA material.